○ ○ ○ Packing List The motherboard package includes the following items: • P4E Series motherboard • Rear I/O panel shield • ATA-66/100 IDE connector cable Connects IDE devices to one of the onboard IDE connectors. • ATA-133 IDE connector cable (P4E & P4ES only) Connects ATA-133 IDE devices to one of the onboard ATA-133 IDE connectors.
○ ○ ○ Intel 845E Chipset The P4E Series motherboards use a version of the Intel 845 Chipset, the 845E, a multi-function chipset for higher- end performance and mainstream systems. The components of the chipset include the following de- vices mounted on the board: •...
You can then set a PCI Device as any trollers must be set to En- of the boot devices. abled in the IWILL Smart This feature sets only one alternate drive controller as Setting section of the the selected PCI Device for seeking a bootable device.
Page 84
(ATA-133 or Serial ATA) if you are not using them. CMOS Setup Utility – IWILL Smart Setting Note: The screen above is for the P4ES. The P4E screen will not have the ‘Onboard SerialATA’ line and the P4L will not have either it or the ‘Onboard UltraATA133’ line.
Subwoofer. These speakers make up the full set for a Home Theater speaker system. Speaker Connections The P4E Series motherboards have several means of con- necting a 5.1 speaker system to the board. The rear I/O panel provides the following connections: •...
Need help?
Do you have a question about the P4E Series and is the answer not in the manual?
Questions and answers