Packing List Pre-Use Checklist 1: Introduction This is the User’s Manual is for the P4G Series mother- boards. Anything in this manual that only applies to one board is clearly noted. Please read this chapter before you use your motherboard and identify which parts of the manual you will need to refer to.
○ ○ Packing List The motherboard package includes the following items: • P4G Series motherboard • Rear I/O panel shield • ATA-66/100 IDE connector cable Connects IDE devices running in any mode up to ATA-100 to one of the onboard IDE connectors.
Hardware Options The P4G Series of motherboards have some hardware options you can purchase separately: • FI Panel A front panel extender that mounts in a 5¼-inch drive bay in the system housing.
○ ○ ○ Intel 845G Chipset The P4G Series motherboards use a version of the Intel 845 Chipset, the 845G, a multi-function chipset for higher- end performance and mainstream systems. The chipset includes a high performance onboard display graphics controller. The 845G chipset also supports the use of an AGP display card installed in the AGP slot.
The P4G Series motherboards include additional disk drive subsystems you may want to make use of. Both P4G Series boards have a Promise Technologies AT-133 IDE controller and device interfaces. The P4GS includes both ATA-133 and a Serial ATA controller with one onboard Serial ATA drive connector.
En- If you have the P4G, the Onboard Device is the Promise abled in the IWILL Smart ATA-133 Primary Master. On the P4GS, if you connect a Setting section of the...
Page 86
Configuring CPU settings at variance with Intel’s specifications can damage the CPU and void the CPU warranty. You can disable The PromiseATA ATA- 133 storage controller if you are not using it. CMOS Setup Utility – IWILL Smart Setting ○ ○ ○...
Most system housings will have all of these LEDs mounted in the housing’s front panel. Additional System Features This motherboard supports the IWILL “FI Panel” front panel extender. The FI Panel connectors on the motherboard connect to cables from the FI Panel, which mounts in a 5¼-inch bay in the system housing and in-...
To maximize perfor- mance, select a processor with the fastest clock speed the system budget or specification allows. The CMOS Setup Utility’s IWILL Smart Setting section will automatically detect and configure whatever proces- sors are installed. Manual configuration is also available,...
5.1 system. The P4E motherboards also have an onboard connector for IWILL’s optional audio port brackets, which can also provide RCA audio connectors for a 5.1 system. ○ ○...
Need help?
Do you have a question about the P4G Series and is the answer not in the manual?
Questions and answers