NAPCO Security Command Center Operating Manual page 37

Trouble System Trouble
Indication Condition
E40-00 RF Self Test Failure
E41-NN Fire Trouble
E51-00 Bell/Siren Trouble
Telemetry Trouble
E58-00
E59-00 Telemetry Failure
Dirty Smoke Detector
E66-00
E99-00 Keypad Panic Shorted
too Long
S Y S T E M T R O U B L E E R R O R C O D E S
A wireless motion sensor on the zone indicated has failed its automatic self test routine.
Call installing company for service.
A problem has been detected on the Fire zone indicated. Call installing company for service.
(GEM-P1632 and GEM-P816 panels only).
There is a problem with the Bell or Siren. Call installing company for service.
Call installing company for service.
Call installing company for service.
"Clean Me" indication (Smoke Detector dirty). Call installing company for service.
Call installing company for service.
Action
37