NAPCO Security Command Center Operating Manual page 16

A C T I V A T E
B E L L T E S T
D I S P L A Y
S Y S T R B L
D I S P L A Y
F I R E A L A R M
D I S P L A Y
F I R E T R B L
A C T I V A T E
C H I M E
A C T I V A T E
W A T C H
16
F U N C T I O N M E N U
Activate Bell Test?
performs a battery test. If the alarm does not sound, call for service.
Y / N
•
If the battery is low, a "LOW BATTERY E02-00 SERVICE" will appear in the display
indicating a low battery condition. Allow 24 hours for the battery to recharge. If the
trouble continues, call for service.
Display System Troubles?
a problem detected in the system. (See SYSTEM TROUBLE ERROR CODES for a full
Y / N
description of these codes).
troubles.
(For GEM-P9600/3200 panels only).
Display Fire Alarms?
NEXT and PRIOR Buttons to scroll zones (required for GEM-P3200/9600 panels. GEM-
Y / N
P816/1632 panels will auto-scroll).
Display Fire Troubles?
Zone(s). Use NEXT(P) and PRIOR (Q) to scroll zones (required for GEM-
Y / N
P3200/9600 panels. GEM-P816/1632 panels will auto-scroll).
Activate Chime?
programmed zone is faulted while disarmed. To deactivate the Chime Mode, re-enter the
Y / N
Function Mode and when "DEACTIVATE CHIME" is displayed, press YES (P). Note:
The Chime Mode is disabled while armed.
Activate Watch Mode?
optional feature simultaneously turns on all zones designated as Day Zones, which will
Y / N
cause an indication at the keypad if a zone is opened while the system is disarmed. To
deactivate the Watch Mode, arm, then disarm. All Day Zones will revert to regular Burglary
Zones. Note: The Watch Mode is disabled while armed.
GEM-P9600 and GEM-P3200 control panels only).
Activates the alarm (while disarmed) for about 2 seconds and
Displays 1- or 2-digit error code along with a description of
Use NEXT(P) and PRIOR (Q) to scroll system
Displays alarms that have occurred on the Fire Zone(s). Press the
Displays trouble conditions that have been detected on the Fire
The Chime Mode will sound a tone at the keypad when the
(Optional - Watch Mode programmed? YES NO) This
(Note: This function available with