Vivotek IP7153 User Manual page 55

NOTE
► Up to 5 privacy mask windows can be set up on the same screen�
► If you want to delete the privacy mask window, please click the 'x' on the upper right-hand corner of
the window�
Advanced Mode
Sensor Settings
Click Sensor Settings to open the Sensor Settings page. On this page, you can set the exposure level,
and AGC (Auto Gain Control) settings�
You can configure two sets of sensor settings: one for normal situations, the other for special situations,
such as day/night/schedule mode�
■ Exposure level: You can manually set the exposure level, which ranges from 1 to 8 (dark to bright). The
default value is 4�
■ Enable AGC (Auto Gain Control): You can manually set the AGC level to Normal or Max.
■ Enable BLC (Back Light Compensation): Enable this option when the object is too dark or too bright
to recognize� It allows the camera to adjust to the best light conditions in any environment and
automatically give the necessary light compensation�
You can click Preview to fine-tune the image, or click Restore to recall the original settings without
incorporating the changes� When completed with the settings on this page, click Save to enable the
settings and click Close to exit the page.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Sensor Setting 1:
For normal situations
Sensor Setting 2:
For special situations
User's Manual - 55