Vivotek IP7153 User Manual page 102

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
daylight_enable
daylight_dstactual
mode
daylight_auto_begi
ntime
daylight_auto_endt
ime
timezones
updateinterval
restore
reset
restoreexceptnet
restoreexceptdst
102 - User's Manual
<boolean>
<boolean>
string[19]
string[19]
NONE
0,
3600,
86400,
604800,
2592000
0,
<positive integer>
0,
<positive integer>
<Any value>
<Any value>
400: GMT 10:00 Brisbane, Canberra,
Melbourne, Sydney, Guam, Vladivostok
440: GMT 11:00 Magadan, Solomon Is.,
New Caledonia
480: GMT 12:00 Aucklan, Wellington, Fiji,
Kamchatka, Marshall Is.
520: GMT 13:00 Nuku'Alofa
6/6 Enable automatic
time zone.
6/7 Check if current time is under daylight
saving time.
6/7 Display the current daylight saving start
time.
(product dependent)
6/7 Display the current daylight saving end
time.
(product dependent)
6/6 List time zone index which support daylight
saving time.
6/6 0 to Disable automatic time adjustment,
otherwise, it indicates the seconds between
NTP automatic update intervals.
7/6 Restore the system parameters to default
values after <value> seconds.
7/6 Restart the server after <value> seconds if
<value> is non-negative.
7/6 Restore the system parameters to default
values except (ipaddress, subnet, router,
dns1, dns2, pppoe).
This command can cooperate with other
"restoreexceptXYZ" commands. When
cooperating with others, the system
parameters will be restored to the default
value except for a union of the combined
results.
7/6 Restore the system parameters to default
values except all daylight saving time
settings.
daylight saving time in