Vivotek IP7153 User Manual page 10

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Set up the Network Camera through Wireless Connection (IP7154 only)
1� Check the SSID for your wireless access point (AP)�
2. Go to the IP7154 Configuration page > Advanced mode > Wireless LAN.
3� Type in the SSID the same as your AP�
4� Select the Wireless mode as "Infrastructure"�
5� Click Save� The Network Camera will reboot�
6� Wait for the live image to be reloaded to your browser� Then, unplug the power cable and
Ethernet cable from the Network Camera�
7� Replug the power cable to the camera� The Network Camera will now operate in wireless
mode�
NOTE
► SSID, abbreviated from Service Set Identifier, is the name assigned to the wireless network.
The IP7154 factory SSID setting is set to "default"�
► Select "Ad-Hoc" wireless mode if you want the IP7154 to communicate without using an AP
or wireless router�
► For detailed information about wireless connection, please refer to Wireless LAN on page 44�
10 - User's Manual