Vivotek IP7153 User Manual page 117

panspeed
tiltspeed
zoomspeed
autospeed
focusspeed
dwelling
axisx
axisy
preset_i<0~19>_name
preset_i<0~19>_
dwelling
patrol_i<0~39>_name
patrol_i<0~39>_
dwelling
patrol_i<0~39>_seq
uart
cameraid
isptz
disablemdonptz
pantilt_port
pantilt_camid
zoom_port
zoom_camid
lensptzcapability
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
-5 ~ 5 0
-5 ~ 5 0
-5 ~ 5 0
-5 ~ 5 0
-5 ~ 5 0
0 ~ 9999 0
-104 ~ 104 0
-15 ~ 28 0
string[40] <blank>
0 ~ 255 <blank>
string[40] <blank>
0 ~ 255 <blank>
string[64] <blank>
0 ~ (m-1), m is 0
UART count
0~255 0
0 ~ 2 0
<boolean> 0
<integer> <blank>
0 ~ 255 <blank>
<integer> <blank>
0 ~ 255 <blank>
<positive <product
integer> dependent>
1/4 Pan speed
1/4 Tilt speed
1/4 Zoom speed
1/4 Auto pan speed
1/4 Auto focus speed
1/4 Dwelling time during patrol
1/7 Axis X coordinate, used
internally.
1/7 Axis Y coordinate, used
internally.
1/4 Name of the preset
location.
1/4 Dwelling time at each
preset location.
1/4 The name of patrol location
1/4 The dwelling time of each
patrol location
1/4 Patrol sequence
1/4 Select corresponding uart
(capability.nuart>0).
1/4 Camera ID controlling
external PTZ camera.
1/7 0: disable PTZ commands.
1: enable PTZ commands
with PTZ driver.
2: enable PTZ commands
with UART tunnel.
1/4 Disable motion detection
on PTZ operation.
1/4 Pan and tilt channel.
1/4 ID of camera on pan/tilt
channel.
1/4 Zoom channel.
1/4 ID of camera on zoom
channel.
1/7 Indicate the lens and PTZ
capability of the camera.
The value change when
changing the PTZ driver.
User's Manual - 117