Before First Use
Wash the bean hopper, bean hopper
lid, and measuring glass in hot, soapy
water. Rinse and dry.
Coffee Mill Use
1. Unplug Coffee Mill.
2. Attach bean hopper to motor
housing by turning bean hopper
clockwise until snug.
3. Fill bean hopper with whole coffee
beans. Attach lid to bean hopper
by turning clockwise.
NOTE: Grinding flavored coffee beans
is not recommended. Flavored beans
will impart an off-taste to any other
coffee that is ground in the mill.
Additionally, many flavored coffee
beans have sugars or syrups added in
the roasting process. These sugared
beans may cause the mill to clog,
damaging the unit.
Electrical Shock Hazard
Plug into a grounded 3-prong
Do not remove ground prong.
Do not use an adapter.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
4. Plug into a grounded 3-prong outlet.
Coffee Mill Operation
5. Select grind by rotating grind-
adjustment ring, aligning markings
with the grind indicator arrow on
the motor housing. See "Coffee
Grinding Tips" on page 8 to select
the appropriate grind adjustment.
6. Position measuring glass under
spout. The glass shows the
approximate amount of coffee
needed to brew a given number of
cups. Individual tastes may require
slightly more or less coffee.
7. To grind coffee, flip "On/Off"
switch to "On" position. When
measuring glass is filled with desired
amount of ground coffee, flip
"On/Off" switch to "Off" position.
NOTE: To avoid grounds spraying
beyond glass, do not lift grind spout
cover while the coffee mill is operating.