Commercial Mode Setup For Master Tv - LG 32LH250H Setup Manual

Lodging guest interactive tvs

Hide thumbs Also See for 32LH250H:

Owner's manual (40 pages)

Service manual (39 pages)

Specifications (4 pages)

Table Of Contents

Table of Contents

Note: Disconnect all Aux inputs. Under certain conditions, Auto Tuning

(Channel Search) is disabled if there is an Aux input active.

Commercial Mode Setup Procedure

1. Set Installer Menu Items

(Enter the TV Installer Menu—refer to the "Installer Menu" section of

this document for detailed instructions.)

a. Set Installer Menu item 117 FACT DEFAULT to 001, and press ENTER

on the Installer Remote. (This clears all Installer Menu custom settings,

channel labels / icons, etc. and reloads the factory default settings.)

b. Set item 003 BAND/AFC, as appropriate.

- Broadcast: Set to 000.

- CATV: Set to 001.

c. Set other particular installer items that affect your TV programming net-

work. Enable/disable Aux

d. After you have adjusted all required Installer Menu item settings, press

ENTER on the remote to exit the menu and save your changes.

2. Set Up TV Features

(Channel, Picture, Audio, Lock, Time, Option, Digital Captions, etc.

See TV Clonable Options list and TV

3. Run Auto Tuning (Channel Search)

a. (Search for all available channels.) Go to the Channel Menu, access

the Auto Tuning option, and follow the on-screen instructions.

b. Edit the Channel Scan. In the Channel Menu, access the Channel Edit

option.

• Add/delete channels per your system requirements.

Note: Physical channel numbers are used to identify virtual channels.

• Add familiar channel trademarks/logos like ABC, CBS, NBC, etc. to

the Channel-Time on-screen display. In the Channel Menu, select the

Channel Label option. Add identifiable labels (logos) for the end user

to readily know what common networks are available.

4. Transfer TV Setup to Internal TV Controller: 2-5-5 + MENU Mode

After the TV channel scan has been edited and channel label icons

added, enter the Installer Menu. Once in the Installer Menu, press

2-5-5 + MENU on the remote. This transfers the TV setup to the internal

controller box.

5. Add Custom Channel Labels for Analog Channels: 2-5-4 + MENU Mode

Enter the Installer Menu, and press 2-5-4 + MENU. Add your own custom

text labels to channel on-screen displays. Note: Digital Channels often

have a broadcaster generated label (see 2-5-4 + MENU reference informa-

tion). When you are finished, press MENU to exit 2-5-4 + MENU Mode.

Verify TV Setup

At this point, verify that the channel lineup, channel icons, and custom labels are correct.

Make sure the TV features

to 000 to lock the channel scan and restrict Setup Menu access. After the preceding has

been completed, the Master TV Setup is ready to be copied to a Clone Programmer

(see cloning information in this document).

206-4118

This page provides an overview of a Master TV configuration.

- HRC: Set to 002.

- IRC: Set to 003.

sources, set a Start Channel, etc.

Menus information.)

are set per your requirements. Set item 028 CH. OVERIDE