Custom Master Tv Setup; Before You Begin; Clonable Tv Setup Menu Features - LG 55EW960H Commercial Mode Setup Manual

Hide thumbs Also See for 55EW960H:

Commercial mode setup manual (85 pages)

Owner's manual (53 pages)

Owner's manual (53 pages)

Table Of Contents

Table of Contents

This section describes how to create a customized Master TV Setup for cloning purposes when

the TV is in Pass-through Mode. All cloning (export and import) processes on the TV are performed

via USB memory device / ".tlx" file. The Master TV Setup may be exported to a Clone (.tlx) file,

which can then be used (i.e., imported) to configure either TVs that are to remain in Pass-through

Mode or TVs that are to be configured for FTG Mode.

Cloning requirements and procedures are described in detail on pages 44 to49.

Note: You can also use the FTG File Manager to create an FTG Configuration (.tlx) file for FTG

Mode configuration/cloning purposes, if desired (see pages 50 to 51). However, it is not possible

to customize TV setup menu settings in the FTG File Manager. If you wish to include customized

TV setup menu settings in the TV configuration, in addition to the channel lineup and Installer

Menu settings, perform the Master TV Setup procedure to create a Clone (.tlx) configuration file.

Before You Begin

• It is recommended that you disconnect all Aux inputs if you intend to run Auto Tuning (Channel

Search). Under certain conditions, Auto Tuning is disabled if there is an Aux input active.

• A Clone (.tlx) file comprises Installer Menu settings, IP Environment Menu settings (with the

exception of unique TV attributes and settings), and all TV sources' (analog, digital, AV, HDMI,

etc.) clonable setup menu settings. See also "Clonable TV Setup Menu Features" list below.

• If the ".tlx" file (either a Clone or FTG Configuration file) to be imported on the Target TV(s)

contains an FTG Channel Map, the Target TV(s) will be configured for FTG Mode, though as

part of the import process, depending on the types of channels included in the Channel Map, you

may have the option to select either logical or physical channel tuning. If you would like the Target

TV(s) to remain in Pass-through Mode, the ".tlx" file should not include an FTG Channel Map.

Clonable TV Setup Menu Features

Picture

Smart Picture Mode

Picture Mode Settings

Sound

Smart Sound Mode

Sound Mode Settings

Volume Mode

AV Sync Adjustment

Note: Some menu options vary between analog and digital channels and Aux inputs.

Note: The Quick Settings Menu is initially displayed when you press the

Remote. Select the All Settings

advanced settings are duplicated in the Quick Settings Menu.

206-4307

Channels

Channel Tuning

Channel Manager

Channel Label

General

Language

Time & Date

−

Clock Mode (Auto/Manual)

−

Time Zone

Timers (No Signal Power Off)

Standby Light

menu icon to access the advanced TV setup menus. Several