Tv Camport Auto Sense Operation - LG 32LH250H Setup Manual

Reference: TV Camport Auto Sense Operation
The Camport Auto Sense function is enabled when:
1. Installer Menu item 34 CAMPORT EN is set to 1 AND
2. Installer Menu item 40 AUTO CAMPORT is enabled (1).
Selectable: Can be accessed with INPUT key, direct
access, etc.
Auto Sense: Switches to this input when connector is insert-
ed. The Camport (Side Video) has the highest priority and will
override any commands including tuning to the Start Channel.
Camport Operation (Stand-Alone)
When Camport Auto Sense is enabled as above, the TV's
source will switch to the Side Video Aux source whenever
a plug is inserted into any of the Side Video panel inputs
(either Composite Video or S-Video).
When the plug is removed, the TV will switch back to the
previous channel or input source that the TV was using
before the plug was inserted. However, if any direct access
to an RF channel or Aux channel is requested while the
Camport is active, then, when the Camport plug is
removed, the TV will switch to the last requested channel.
Source changes using any Source keys (INPUT) are
ignored. Channel Up/Down and Flashback commands are
not direct access tuning commands, and they are also
ignored.
Camport Operation (PPV)
The operation will be similar to that of the Stand-Alone
Mode. However, the PPV providers may send different
commands to the TV for the same user commands. For
instance, some providers will always send a direct tune
command when they receive a Channel Up/Down or a
Flashback command while other PPV providers will just
send a key command.
36
CAMPORT (Front Video) Functionality Control
Item 34
CAMPORT EN AUTO CAMPORT
0
0
1
1
Previous State Operation While
Before Inserting CAMPORT is
CAMPORT
Aux or RF
Channel
Aux or RF
Direct Access
Channel
Ch Up/Down,
Aux or RF
Flashback, and
Channel
TV/AV Keys
Previous State Operation While
Before Inserting CAMPORT is
CAMPORT
Aux or RF
Channel
Aux or RF
Direct Access
Channel
Aux or RF
Ch Up/Down,
Channel
Flashback, and
TV/AV Keys
Item 40 Front Video
Operation
0 Disabled
1 Disabled
0 Selectable
1 Auto Sense
State Upon
Removal of
Active CAMPORT
Previous Aux
None
or RF Channel
Last Requested
RF or Aux Channel
Previous Aux
or RF Channel
State Upon
Removal of
Active CAMPORT
Previous Aux
None
or RF Channel
Last Requested
RF or Aux Channel
Last Requested
Channel if PPV
translates it to direct
access tuning com-
mand. Otherwise,
goes to Previous
Aux or RF Channel
206-4118