Camport Auto Sense Operation - LG 206-4071P Set Up And Operation Manual

Lg integrated tvs operation guide commercial mode
Table of Contents

Advertisement

TV Camport Auto Sense Operation
The CAMPORT Auto Sense function is enabled when:
1. Installer Menu Item 34, CAMPORT EN is set to 1 AND
2. Installer Menu Item 40, AUTO CAMPORT is enabled (1).
Selectable= Can be accessed with INPUT key, direct access, etc.
Auto Sense= Switches to this input when connector is inserted.
The camport (Front Video) has the highest priority and will
override any commands including tuning to the Start Channel.
CAMPORT Operation (Stand-Alone)
When Camport Auto Sense is enabled as above, the TV's source
will switch to the front video whenever a plug is inserted into
any of the front panel video inputs (either composite Video or
S-Video).
When the plug is removed, the TV will switch back to the previ-
ous channel or input source that the TV was using before the
plug was inserted. However, if any direct access to an RF chan-
nel or Aux channel is requested while the camport is active,
then, when the camport plug is removed, the TV will switch to
the last requested channel. Source changes using any Source
Keys (INPUT) are ignored. Channel Up/Channel Down and
Flashback Commands are not direct access tuning commands
and they are also ignored.
CAMPORT Operation (PPV)
The operation will be similar to that of the Stand-Alone mode.
However, the PPV providers may send different commands to
the TV for the same user commands. For instance, some
providers will always send a direct tune command when it
receives a channel up/down or a flashback command while
other PPV providers will just send a key command.
P A G E 2 0
CAMPORT (Front Video) Functionality Control
Item 34
CAMPORT EN
AUTO CAMPORT
0
0
1
1
Previous State
Before Inserting
While CAMPORT
CAMPORT
Aux or RF Channel
Aux or RF Channel
Direct Access
Aux or RF Channel
Ch Up/Down,
and TV/AV Keys
Previous State
Before Inserting
While CAMPORT
CAMPORT
Aux or RF Channel
Aux or RF Channel
Direct Access
Aux or RF Channel
Ch Up/Down,
and TV/AV Keys
Item 40
Front Video
Operation
0
Disabled
1
Disabled
0
Selectable
1
Auto Sense
Operation
State
Upon Removal
Is Active
Of CAMPORT
None
Previous Aux
or RF Channel
Last Requested
RF or Aux Channel
Previous Aux
Flashback
or RF Channel
Operation
State
Upon Removal
Is Active
Of CAMPORT
None
Previous Aux
or RF Channel
Last Requested RF
or Aux Channel
Last Requested
Flashback
Channel if PPV
translates it to
direct access tuning
command. Otherwise,
goes to Previous Aux
or RF Channel
206-4071

Advertisement

Table of Contents
loading

Table of Contents