Operator’s manual FS 1000 E Please read the Operator’s manual carefully and make sure English you understand the instructions before using the machine. HUSQVARNA CONSTRUCTION PRODUCTS...
Compliance with EU directives Husqvarna Construction Products Sweden AB, Box 2098, SE-550 02 Jönköping, Sweden, tel: +46 (0)36-570 60 00, hereby certifies that its FS-1000 floor saw, having serial numbers 01001 onwards, is manufactured in compliance with the Council's machines directive 98/37/EG, low-voltage directive 73/23/EEG and EMC directive 89/336/EEG, including amendments, and that the following standards were used for guidance: EN 55 014-1, EN 55 014-2, EN 61 000-3-2, EN 50 144-1.
Husqvarna Construction Products Sweden AB. Modifications that are notapproved could lead to serious or fatal injury to yourself or others. Husqvarna Construction Products Sweden AB does not accept any liability if the machine is used in any way or for any purpose that does not comply with these instructions.
If the user does not follow these precautions then The machine rating plate is located on the right side of the neither Husqvarna Construction Products Sweden AB nor its rep- frame, as shown below. resentative can accept any liability, whether direct or indirect.
Pos. no. Part No. Quantity Description Part No. Quantity Description 531072186 Emergency stop FS1000E Parts no longer stocked up to serial no. 9405 531072179 Terminal box FS1000E 531072093 Pulley shaft earlier version 501354001 Base plate mounting 531072094 Pulley shaft assembly earlier version 501354101 Base plate 52G37207...