Technical Data - Husqvarna DM 230 Operator's Manual

Electric motor
Rated voltage, V
Rated output, W
Rated current, A
220-240 V
100-120 V
Weight, kg
Diameter drill bit, mm
Max. diameter of the drill bit, with stand
Max. diameter for the drill bit, handheld
Spindle thread
Water connector
Water pressure - max, bar
Stand, mm
Noise emissions (see note 1)
Sound power level, measured dB(A)
Sound power level, guaranteed dB(A)
Sound levels (see note 2)
Sound pressure level at the operators ear, dB(A)
Vibration levels, a (see note 3)
hv
2
Front handle, m/s
2
Rear handle, m/s
Note 1: Noise emissions in the environment measured as sound power (L
Note 2: Noise pressure level according to EN 12348. Reported data for noise pressure level has a typical statistical dispersion
(standard deviation) of 1.0 dB(A).
Note 3: Vibration level according to EN 12348. Reported data for vibration level has a typical statistical dispersion (standard
2
deviation) of 1 m/s .
Drill bit speed
Gear
with load, rpm
1 580
2 1400
3 2900
14 –
English

TECHNICAL DATA

DM 230
Single-phase
220-240/100-120
1850
8 A
15 A
7
150 mm (5,9")
75 mm (3")
G 1/2"
G 1/4"
8
Ø 60 mm
107
108
93
2,8
2,6
Handheld drilling
Drill bit load Recommended
without load, drill bit size,
rpm mm
Not
730
recommended
1700 40-80
3600 0-40
G 1 1/4"
) in conformity with EN 12348.
WA
Stand drilling
Recommended Recommended
drill bit size, drill bit size,
inch mm
Not
100-150
recommended
2-4 40-80
0-2 0-40
Recommended
drill bit size,
inch
4-6
2-4
0-2