Programmable Functions; General - Icom IC-F31GT Instruction Manual

PROGRAMMABLE FUNCTIONS

n General
In the following explanations, programmable function names are
bracketed, the specific switch used to activate the function depends
on programming.
D KEYPAD LOCK FUNCTION
This function locks access to all programmable switches (except
the switch assigned for the lock function).
Push and hold the [Lock] switch for 1 sec. to toggle the lock func-
tion ON and OFF.
• " " appears while the lock function is ON.
• This function may be inhibited on some channels.
D PRIORITY CHANNEL
This function is used to select a pre-programmed channel at the
push of a switch.
Push the [Priority A/A (Rewrite)/B] switch to select the priority chan-
nel.
• "Prio A" or "Prio B" appears briefly, then the priority channel is auto-
matically selected.
D SCAN FUNCTION
The scan function allows you to search a pre-programmed group of
channels for signals.
Push the [Scan A/B] switch to start/stop scan.
• Scan pauses on a channel when receiving a signal.
• Depending on programming, a message may appear while scanning.
• "Lockout SCAN" (pre-programmed list SCAN) or "Priority SCAN" can
be pre-programmed.
• When the "Power-save function" is activated, the transceiver checks
all pre-programmed channels then returns to the "Power-save func-
tion" again.
4
11