Dealer-Programmable Functions; General; Channel Selection - Icom IC-F30 Instruction Manual

DEALER-PROGRAMMABLE FUNCTIONS
• General
Ask your Icom Dealer or system operator for details concern-
ing your transceiver's programming. When available, pro-
grammed functions are assigned to one of several
switches/keys.
~
In the following explanations, [P] is meant to stand for one
of the dealer-programmable switches/keys (and depends
on the transceiver's programming).
<>
SCAN FUNCTION
CD
Push [P] momentarily; or set the channel selector to the
home position (channel 1).
• The activity LED flashes green.
• Scan pauses when a signal is received.
• Transmitting may be possible depending on programming.
@
Push a digit key to select a different scan list (scanning
channels group) if necessary.
@
To stop the scan, push [P] momentarily again or rotate the
channel selector off the home position.
• Some channels cannot be added or subtracted to a list depend-
ing on programming.
CD
Select the channel to be added or subtracted.
(IDPush and hold [P] to add or subtract the selected channel
from the list.
• One of the following displays appears to indicate that the selected
channel was added to or subtracted from the scan list.
<>
SCAN LIST MODIFICATION
(scan
lockout)
A
selected scan can be subtracted from or added to a scan
list (scanning channels group). "Bank" channels and scan list
channels are related so that channels which do not appear in
a "bank" cannot be added to or subtracted from a list.
"f-I.-
Lf -,.-
r,-I.'"
I
.J
L
r·"
'f "" I
Lf
I "
¢
PRIORITY FUNCTION
To select a pre-programmed priority channel:
Push [P] momentarily.
• The pre-programmed priority channel is automatically selected re-
gardless of the channel selector position.
• Push and hold [PTT] to transmit if desired.
• Rotate the channel selector to exit the priority channel.
¢
BANK FUNCTION
To change memory banks:
Push [P] one or more times; or push a digit key, [1 ]-[6].
• Indicators appear for banks
2-6
(no indicator appears for bank 1).
• Channel selection
6