Explicit Definitions; Fcc Information - Icom IC-7100 Basic Manual

Hf/vhf/uhf all mode transceiver
Hide thumbs Also See for IC-7100:
Table of Contents

Advertisement

FOREWORD
Thank you for purchasing this fine Icom product. The IC-7100
/
/
hf
vhf
uhf all mode transceiver
Icom's superior technology and craftsmanship combining tra-
ditional analog technologies with the new digital technology,
Digital Smart Technologies for Amateur Radio (D-STAR), for
a balanced package. With proper care, this product should
provide you with years of trouble-free operation.
We thank you for making your IC-7100 your radio of choice,
and hope you agree with Icom's philosophy of "technology
first." Many hours or research and development went into the
design of your IC-7100.
FEATURES
❍ IF DSP features
❍ All mode capability covering 160–2 m and
70 cm (depending on version)
❍ Compact with separated front panel
❍ ±0.5 ppm of high frequency stability
❍ Baudot RTTY demodulator
❍ Selectable SSB transmission passband
width (For both higher and lower pass
frequency)
❍ Standard voice synthesizer/voice recorder
❍ SD card slot ready for several memory
storage
❍ Voice recorder to records your communication
❍ DV mode (Digital voice + Low-speed data
communication) operation-ready
– Text message and call sign exchange
– Transmit position data
❍ DR (D-STAR Repeater) mode and repeater
list allow you to easily operate using a
D-STAR repeater
Spurious signals may be received near some frequen-
cies.
These are created in the internal circuit and does not
indicate a transceiver malfunction.
Icom, Icom Inc. and the Icom logo are registered trademarks
of Icom Incorporated (Japan) in Japan, the United States,
the United Kingdom, Germany, France, Spain, Russia and/
or other countries.
'FM' means 'Full Manual.'
'sec. MM' means section number.
So when '(FM sec. MM)' is described on this manual,
see the PDF type Full Manual's section number for
your reference.
is designed and build with

EXPLICIT DEFINITIONS

WORD
Personal death, serious injury or an ex-
R DANGER!
plosion may occur.
Personal injury, fire hazard or electric
R WARNING!
shock may occur.
CAUTION
Equipment damage may occur.
Recommended for optimum use. No risk
NOTE
of personal injury, fire or electric shock.
IMPORTANT
READ ALL INSTRUCTIONS
before using the transceiver.
SAVE THIS INSTRUCTION MANUAL—
instruction manual contains important operating instructions
for the IC-7100.

FCC INFORMATION

• FOR CLASS B UNINTENTIONAL RADIATORS:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential instal-
lation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that inter-
ference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the inter-
ference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and re-
ceiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
CAUTION: Changes or modifications to this device,
not expressly approved by Icom Inc., could void your
authority to operate this device under FCC regula-
tions.
i
DEFINITION
carefully and completely
This

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents