Icom IC-7100 Basic Manual page 12

1
PANEL DESCRIPTION
Controller — Function display (Continued)
!9
!8
!7
o CLOCK READOUT
Shows the current time.
• UTC time or local time can be selected.
!0 SPLIT ICON (FM sec. 6)
appears when the Split function is turned
" "
ON.
!1 LOCK ICON (FM sec. 5)
" " appears when the Lock function is activated.
1 ⁄ TUNING DIAL SPEED ICON (p. 3-10)
4
(Mode: SSB-D/CW/RTTY)
" " appears when the tuning dial speed is set so
that one rotation is equal to
tion.
• This function is selectable only when the quick tuning
function is turned OFF.
!2 FREQUENCY READOUTS
Displays the operating frequency.
➥
Touch the MHz digits to enter the Band selection
➥
screen.
Touch the MHz digits for 1 second to turn the 1
➥
MHz quick tuning mode ON or OFF.
Touch the kHz digits to turn the preset kHz quick
➥
tuning mode ON or OFF.
Touch the kHz digits for 1 second to enter the Tun-
➥
ing step selection screen.
Touch the Hz digits to for 1 second to toggle be-
➥
tween 10 Hz and 1 Hz steps.
!3 VFO/MEMORY ICONS (p. 3-4)
"VFOA" or "VFOB" appears whether VFO A or
➥
VFO B is selected.
"MEMO" appears when the memory mode is se-
➥
lected.
1 ⁄ of the normal rota-
4
o
!4 MEMORY CHANNEL READOUT
Shows the selected memory channel, scan edge
➥
channel or Call channel.
• Memory bank indicator (A to E) appears to the left of
memory channel.
Touch to toggle between the VFO and Memory
➥
modes.
!5 SELECT MEMORY CHANNEL ICON
"" appears when the selected memory channel is
set as a select memory channel. (FM sec. 12)
!6 INFORMATION READOUT
Displays the transmit frequency of the Split opera-
tion, descriptions of the memory channel or Re-
ceived Call sign in the DV mode, and so on.
!7 FUNCTION DISPLAY (p. 1-10)
Shows the function of the Touch keys.
• Push to change the set of functions assigned to
MENU
the touch keys.
• Toggles the function display menu between M-1, M-2 and
M-3 menus or D-1 and D-2 menus.
!8 MULTI-FUNCTION METER INDICATION
➥ Displays the signal strength while receiving.
➥ Displays the relative output power, SWR, ALC or
compression levels while transmitting.
➥ When the Meter Peak Hold function is ON, the
peak level of a received signal strength or the
output power is displayed for approximately 0.5
seconds.
➥ Touch to select the RF power, SWR, ALC or Com-
pression meter.
➥ Touch for 1 second to display the Multi-function
meter.
1-8
!0
!1
!2
!3
!4
!5
!6
(FM sec. 11)