Controller - Multi-Function Keys; D M-1 (M-1 Menu) Display; D M-2 (M-2 Menu) Display; D M-3 (M-3 Menu) Display - Icom IC-7100 Basic Manual

1
PANEL DESCRIPTION
Controller — Multi-function keys
Push to change the set of functions assigned
➥
MENU
to touch keys.
• Toggles the function display menu between M-1, M-2 and
M-3 menus or D-1 and D-2 menus.
• Functions vary, depending on the operating mode.
• In the DR mode, the D-1 and D-2 menus can be select-
ed.
Touch or touch for 1 second to select the displayed
➥
functions.
D
M-1 (M-1 menu) Display
D M-2 (M-2 menu) Display
(Mode: SSB)
(Mode: SSB-D)
(Mode: CW)
(Mode: RTTY)
(Mode: AM/AM-D)
(Mode: FM/FM-D/WFM)
(Mode: DV)
D M-3 (M-3 menu) Display
(Mode: SSB/AM/AM-D)
(Mode: SSB-D/RTTY)
(Mode: CW)
(Mode: FM/FM-D/WFM/DV)
D D-1 (D-1 menu) Display
(Mode: DV, when the DR mode is selected)
D D-2 (D-2 menu) Display
(Mode: DV, when the DR mode is selected)
D

Function keys on M-1 display

SCAN KEY [SCAN] (FM sec. 12)
Touch to display the "SCAN" screen.
• Push
MENU
SPLIT KEY [SPLIT] (FM sec. 6)
➥ Touch to turn the split function ON or OFF.
• "
ON.
➥ Touch for 1 second to activate the quick
split function.
• The transmit frequency shifts from the receive
frequency according to the "SPLIT Offset" op-
tion in the "Function" Set mode. (FM sec. 6)
> Function > SPLIT/DUP > SPLIT Offset
SET
• The quick split function can be turned OFF in
the "Quick SPLIT" item of the "Function" Set
mode. (FM sec. 6)
> Function > SPLIT/DUP > Quick SPLIT
SET
VFO SELECT KEY [A/B] (p. 3-5)
➥ Touch to select either VFO A or VFO B.
➥ Touch for 1 second to equalize the undis-
played VFO settings to that of the displayed
VFO.
VFO/MEMORY KEY [V/M]
➥ Touch to switch between the VFO and
memory modes. (p. 3-4)
• Touching Memory channel also selects the
VFO or memory modes.
➥ Touch for 1 second to copy the memory
contents to the displayed VFO. (FM sec.
11)
MEMORY WRITE KEY [MW] (FM sec. 11)
Touch for 1 second to store VFO data into the
selected memory channel.
• This can be done in both the VFO and memory
modes.
D

Function keys on M-2 display

DUPLEX KEY [DUP] (FM sec. 4)
➥ Touch to select the duplex direction, or to
turn OFF the function.
• "DUP–" or "DUP+" is displayed during duplex
operation.
➥ In the FM mode, touch for 1 second to
turn the one-touch repeater function ON
or OFF.
1-10
to return to the previous screen.
" appears when the split function is