Ups Setting (Only For N2200) - Thecus N0204 User Manual

System will turn on at 8:00 AM on Monday, and will not shut down unless powered
down manually.
You may also choose two on times or two off times on a particular day, and the
system will act accordingly.
Example - Monday: Off: 8:00; Off: 16:00
System will turn off at 8:00 AM on Monday. System will turn off at 16:00 PM on
Monday, if it was on. If the system was already off at 16:00 PM on Monday, system
will stay off.

UPS Setting (Only for N2200)

The Thecus IP storage can also support various uninterruptible power supply unit
via either "Serial" or "USB" interface (depend on model) to provide extra data
security and accessibility in the case of a power failure.
From the Status menu, choose the UPS item and the UPS Setting screen appears.
Make any changes you wish, and press Apply to confirm changes.
See the following table for a detailed description of each item.
UPS Setting
Item
UPS Monitoring
Manufacturer
Model
Battery Status
Power
Seconds between power failure and
first notification
Seconds between subsequent power
failure notifications
Shutdown the system when the
battery charge is less than
Apply
Description
Enable or disable UPS monitoring.
Choose the UPS manufacturer from the dropdowns.
Choose the UPS model number from the
dropdowns.
Current status of the UPS battery
Current status of the power being supplied to the
UPS
Delay between power failure and first notification in
seconds.
Delay between subsequent notifications in seconds.
Amount of UPS battery remaining before system
should auto-shutdown.
Press Apply to save your changes.
39