Ups Setting - Thecus N7700 User Manual

Follow the steps below to upgrade your firmware:
1. Use the Browse button
2. Press Apply.
3. The beeper beeps and the Busy LED blinks until the upgrade is complete.
NOTE
WARNING

UPS Setting

The N7700 can also support various uninterruptible power supply units via either
"Serial" or "USB" interface, providing extra data security and accessibility in the
case of a power failure.
From the Status menu, choose the UPS item and the UPS Setting screen appears.
Make any changes you wish, and press Apply to confirm changes.
to find the firmware file.
• The beeper only beeps if it is enabled in the System Notification menu.
• Check Thecus website for the latest firmware release and release notes.
• Downgrading firmware is not permitted.
Do not turns off the system during the firmware upgrade process.
This will lead to a catastrophic result that may render the system inoperable.
31