Raid Setup And Firmware Installation; Setting Up The Raid - Thecus N3200PRO User Manual

8. Access the N3200PRO Web Administrator Interface by pressing the Start
Browser button. You can also configure another N3200PRO at this point
by clicking the Setup Other Device button. Press Exit to exit the wizard.
NOTE

RAID Setup and Firmware Installation

Once the setup wizard has completed, you should now be inside the Web Admin
Interface. From here, it is time to initialize your RAID system and other setting
per needed.
NOTE

Setting up the RAID

1. From the Web Admin Interface, navigate to Storage > RAID. The RAID
Information screen appears.
The Thecus Setup Wizard is designed for installation on systems running Windows
XP/2000 or Mac OSX or later. Users with other operating systems will need to install
the Thecus Setup Wizard on a host machine with one of these operating systems
before using the unit.
The next steps are for first time setup only. If you have previously setup your
N3200PRO, you can skip this section of the setup process.
16