3. The Setup Wizard will start and automatically detect all Thecus storage
devices on your network. If none are found, please check your connection
and refer to
Chapter 7: Troubleshooting
4. Select the N2200PLUS that you like to configure.
5. Login with the administrator account and password. The default account and
password are both "admin".
6. Name your N2200PLUS and configure the network IP address. If your switch
or router is configured as a DHCP Server, configuring the N2200PLUS to
automatically obtain an IP address is recommended. You may also use a
static IP address and enter the DNS Server address manually.
for assistance.
25