Thecus N0204 User Manual page 44

WAN/LAN1 Configuration
Item
Host name
Domain name
WINS Server
MAC Address
Jumbo Frame Support
IP Sharing Mode
Set IP Address by:
Static / Dynamic
IP
Netmask
Gateway
DNS Server
NOTE
WARNING
Description
Host name that identifies the N2200PLUS on the network.
Specifies the domain name of the N2200PLUS
To set a server name for NetBIOS computer.
MAC address of the network interface.
Enable or disable Jumbo Frame Support of the WAN interface on your
N2200PLUS.
When enabled, PCs connected to the LAN port will be able to access the
WAN.
You can choose a static IP or Dynamic IP, and input your network
configuration.
IP address of the WAN interface.
Network mask, which is generally: 255.255.255.0
Default Gateway IP address.
Domain Name Service (DNS) server IP address.
• Only use Jumbo Frame settings when operating in a Gigabit environment where
all other clients have Jumbo Frame Setting enabled.
• Enabling DHCP automatically turns on UPnP— see the Service Support Screen.
• If you are only using the WAN port, we suggest that you disable IP Sharing
Mode. This will result in higher throughput.
• A correct DNS setting is vital to networks services, such as SMTP and NTP.
Most Fast Ethernet (10/100) Switches/Routers do not support Jumbo Frame and you will not
be able to connect to your N2200PLUS after Jumbo Frame is turned on. If this happens, turn
off the N2200PLUS. Then, press the reset button on the front panel right below power button.
System will bring your network settings back to factory default.
44