Thecus N0204 User Manual page 16

2. Install HDD on the tray, as the following chart:
3. Install the tray with HDD into N0204 miniNAS,
please note that the HDD-1 is in left side and
HDD-2 is in right side. The triangular symbol of
tray must be corresponding with the triangular
symbol of back panel. Push the tray back.
N2200/N2200PLUS:
The N2200/N2200PLUS supports both 2.5" and 3.5" Serial ATA (SATA) hard disks.
To install a hard disk into the N2200/N2200PLUS, follow the steps below:
1. Open front cover of the N2200/N2200PLUS.
2. For 3.5" HDDs
a. Remove an HDD tray and install a 3.5" SATA hard disk onto it.
4 screws here
16