Table of Contents
Advertisement
The blade guides should be as close to the workpiece as
possible. This will help ensure straight cuts by keeping the
blade from twisting and drifting off the cut line.
DISCONNECT BANDSAW FROM POWER!
Loosen the adjustment knob shown in
slide the blade guide as close to the workpiece as
possible, then re-tighten the knob.
The feed rate is controlled by the spring and handle
shown in
.
tension to the spring.
Twist the handle counterclockwise
to remove tension from the spring.
:
Twist the handle clockwise to add
Adjustment Knob
and
Blade guide adjustment knob.
-23-
Blade Guides
Spring
Handle
Feed rate spring and handle.
Advertisement
Table of Contents
