Repair; General; Work On Components After Disassembly; Cleaning - Webasto Thermo 90 Workshop Manual

T 90 / 90 S
HERMO
9.

Repair

9.1

General

This section describes the repairs that may be performed
on the heater Thermo 90 Thermo 90 S when removed.
Any further disassembly will void the warranty.
For re-assembly only Webasto-authorized spare parts
kits are to be used.
9.1.1 Work on Components after
Disassembly
CAUTION
All gaskets located between disassembled components
must always be replaced and discarded.

9.1.1.1 Cleaning

• All disassembled components must be cleaned.

9.1.1.2 Visual Inspection

• Examine all components for damages (cracks,
deformation, wear, etc.) and replace as necessary.
• Examine connectors and wiring for corrosion, loose
contacts, wrong crimping, etc. and repair as
necessary.
• Check terminals for corrosion and contacts for
security. Repair as necessary.
9 R
EPAIR
9-1