System Configuration - Planet GSW-1602SF User Manual

4.3.2 System Configuration

The SNMP System Configuration page provides SNMP parameters. SNMP System Configuration page helps a switch
manager to configure SNMP functions. The screen in
The page includes the following configurable data; see the table 4-3 description of the SNMP System Configuration.
Item
Mode
Read Community
Write Community
Trap Community
Trap Destination
Button
Apply
Refresh
Figure 4-27 SNMP System Configuration screen
Description
Enable or Disable the SNMP function of the device. While set to enable, the manager could
remotely get the interface status and received the traps information. Default mode is Enable.
Functions as a password and used to authenticate the access right of the device. The Read
Community is restricted to read-only, for all MIBs except the community table, for which there
is no access. Up to 8 characters is allowed.
Functions as a password and used to authenticate the access right of the device. The Write
Community accesses the device both read and write - configure to the device via SNMP. Up
to 8 characters is allowed.
Identifies the community string of the trap manager. Up to 8 characters is allowed.
The Trap function enables the Switch to monitor the Trap through the SNMP software, set the
Trap IP Address of the manager workstation where the trap to be sent
Press this button for save current configuration of Web Smart Gigabit Switch.
Press this button for refresh System Configuration screen of Web Smart Gigabit Switch.
Table 4-3 Description of the SNMP System Configuration
User's Manual of GSW-1602SF / GSW-2404SF
Figure 4-27 appears.
-39-