Press this button for save current configuration of Web Smart Gigabit Switch.
Apply
Press this button for refresh Static Aggregation Configuration screen of Web Smart Gigabit
Refresh
Switch.
When using a port link aggregation, note that:
Table 4-11 Description of the LACP Port Configuration.
The ports that can be assigned to the same link aggregation have certain other restrictions (see
below).
Ports can only be assigned to one link aggregation.
The ports at both ends of a connection must be configured as link aggregation ports.
None of the ports in a link aggregation can be configured as a mirror source port or a mirror
target port.
All of the ports in a link aggregation have to be treated as a whole when moved from/to, added
or deleted from a VLAN.
The Spanning Tree Protocol will treat all the ports in a link aggregation as a whole.
Disconnect all link aggregation port cables or disable the link aggregation ports before
removing a port link aggregation to avoid creating a data loop.
User's Manual of GSW-1602SF / GSW-2404SF
-52-