Planet GSW-1602SF User Manual page 125

Object
Port Description
System Name
System Description
System Capabilities
Management Address
Parameters
The Parameters includes the following items: Table 4-40 Description of the Parameters.
Object
Tx Interval
Tx Hold
Description
Optional TLV: When checked the "Port Description" is included in LLDP information
transmitted.
Optional TLV: When checked the "System Name" is included in LLDP information
transmitted.
Optional TLV: When checked the "System Description" is included in LLDP information
transmitted.
Optional TLV: When checked the "System Capability" is included in LLDP information
transmitted.
The system capabilities identify the primary function(s) of the system and whether or not
these primary functions are enabled. The information advertised by this TLV is described in
IEEE 802.1AB.
Optional TLV: When checked the "Management Address" is included in LLDP information
transmitted.
The management address protocol packet includes the IPv4 address of the switch. If no
management address is available, the address should be the MAC address for the CPU or
for the port sending this advertisement. The management address TLV may also include
information about the specific interface associated with this address, and an object identifier
indicating the type of hardware component or protocol entity associated with this address.
Table 4-39 Description of the Transmitted TLVs Parameters
Description
The Web Smart Gigabit Switch is periodically transmitting LLDP frames to its
neighbors for having the network discovery information up-to-date. The interval
between each LLDP frame is determined by the Tx Interval value. Valid values
are restricted to 5 - 32768 seconds.
Default: 30 seconds
This attribute must comply with the following rule:
(Transmission Interval * Hold Time Multiplier) ≤65536, and Transmission Interval
>= (4 * Delay Interval)
Each LLDP frame contains information about how long the information in the
LLDP frame shall be considered valid. The LLDP information valid period is set to
User's Manual of GSW-1602SF / GSW-2404SF
-119-