NAPCO GEM-RP4C Operating Manual page 9

P R O T E C T I N G Y O U R S E L F W H I L E O N T H E P R E M I S E S
Easy Exit
(Optional - Easy Exit programmed?
Your system may have been programmed for Easy Exit, which allows a user to exit the premises while the system is
armed. By activating Easy Exit while the system is armed, the Exit Delay countdown will take place, during which time
you are permitted to leave through the exit door. The Easy Exit Delay time will be identical to the Exit Delay time the
system gives you each time it is armed. This will allow, for example, an early morning commuter to exit the house,
without having to disarm and rearm the system, awaking the family.
Press
E
D
Press to activate Easy Exit on your system.
*
Note: Discuss your Emergency
Features with your Installation
Company.
YES
to activate Easy Exit on your system.
Emergency Buttons
The Blue Emergency Buttons (
active, whether the system is armed or disarmed. The emergency signal will only be
transmitted when an Emergency Button and
• Fire Emergency Simultaneously press
station of a fire emergency.
• Auxiliary Emergency Simultaneously press
station of an Auxiliary emergency.
• Police Emergency Simultaneously press
station of a police emergency.
NO)
(GEM-P3200/GEM-P9600 V11D or less, GEM-P1632 V8G or less)
(GEM-P3200/GEM-P9600 V20 or greater, GEM-P816/P1632 V9A or greater)
(Only available if programmed)
7, 8
*
(Fire Emergency programmed?
*
(Auxiliary Emergency programmed?
*
(Police Emergency programmed?
& ), if programmed, are always
9
are pressed at the same time.
G
and to alert the central
7 G
YES
and to alert the central
8 G
and to alert the central
9 G
NO)
YES NO)
YES NO)
9