NAPCO GEM-RP4C Operating Manual page 19

17
CHIME
18
CHIME
19
CHIME
K E Y P AD F U N C T I O N S
Activate Program?
17.
feature is disabled while armed. (See PROGRAMMING USER CODES).
18. Activate Download?
to exit. Note: This feature is disabled while armed.
19. Relay Control?
(Relay Control programmed?
Turns ON or OFF one or more programmed Relay Group. Press
group on or off; press NEXT(
scroll back to the previous group. Press
• Relay Group 01: [ ____________________________________ ]
• Relay Group 02: [ ____________________________________ ]
• Relay Group 03: [ ____________________________________ ]
• Relay Group 04: [ ____________________________________ ]
• Relay Group 05: [ ____________________________________ ]
• Relay Group 06: [ ____________________________________ ]
• Relay Group 07: [ ____________________________________ ]
• Relay Group 08: [ ____________________________________ ]
Activates the Program Mode from Keypad No. 1. Note: This
For installer's use only. If accidentally enabled, press
YES
E ) to proceed to the next group, or PRIOR (
C when done.
C
).
NO
J
to turn the displayed
F ) to
19