Napco - NAPCO GEM-RP4C Operating Manual

The GEM-RP4RFC and the GEM-
RP4C are "smart", interactive, menu-
driven keypads designed for your
Napco control panel. A digital display is
provided with each keypad to show the
status of your system.
This booklet contains important
information about the operation of your
system with your keypad.
carefully and keep it handy for future
reference. Check the Glossary for an
Test your sounding device and backup battery
1. While disarmed, press A.
2. Answer NO (press F) until "3" (Bell Test) appears in the
window.
3. Press YES (E) to execute the test. The alarm will sound
for about two seconds.
•
If the alarm does not sound, call for service.
•
If the battery is low, a system trouble E02 will appear in
the display. Allow 24 hours for the battery to recharge. If
the trouble continues, call for service.
2
I N T R O D U C T I O N
explanation of terms that may be
unfamiliar to you.
You will probably find subjects
mentioned in this booklet that do not
apply to your system. Napco control
panels have such a wide variety of
features that few security systems, if
any, will ever need them all.
Read it alarm professional has
appropriate features for your particular
needs.
IMPORTANT - TEST YOUR SYSTEM WEEKLY
Regardless of how your system has
been configured, rest assured that it
has been carefully designed and
engineered to the highest industry
standards. To assure optimum safety
and security, familiarize yourself with
this equipment. Periodically check its
condition and state of readiness by
Your
testing it at least once a week in both
chosen
the AC/battery and battery-only modes
(ask your alarm professional how to
make these tests).
Test your central station communicator
1. While disarmed, press A.
2. Answer NO (press F) until "15" (Telephone Test)
appears in the window.
3. Press YES (E) to send a test code to the central
station.
4. If the test is not successful, "E03" will display, indicating a
communication failure. Call for service.