Playlist Creation; Playlist Media Playback; Removing Files From Playlist - Sumvision Cyclone MKV 2 User Manual

Playlist Creation:

To create a playlist, first enter the "Browser" interface.
Once on the Browser interface, navigate to the directory where your media
files are stored.
Select the media files you wish to add to the playlist by pressing on the
SELECT button on the remote control.
Once the files have been selected a red tick will be displayed next to the files.
To add the selected files into the playlist press on the CONFIRM button on the
remote control.
The selected file will now be added to the playlist.

Playlist Media Playback:

Navigate from the Main menu to the playlist interface.
Once in the playlist interface select the file to begin playlist playback.

Removing Files from Playlist:

To remove media files from the playlist, navigate to the playlist.
Navigate to the file you wish to remove and press SELECT on the remote
control. Once selected a red tick will display next to the file.
Press on the CONFIRM button on the remote control.
This will remove the selected file from the playlist.
Notice: Only documents in the player's hard disk can be added to the playlist.
Documents in other peripherals cannot be added.
Important Notice: If the hard disk drive is partitioned, please ensure that the
first partition is set as the primary partition. If the first
partition is an extended partition, this function may not
work.
Cyclone MKV 2 Multimedia Enclosure
Page 36.
Version 1.2