Viewing Multimedia; Movie Playback - Sumvision Cyclone MKV 2 User Manual

WPS (AP)
Select "Infrastructure (AP)", this will cause the Cyclone MKV 2 to perform a
scan for wireless networks within its range. Networks that the player has
detected will display their network names (SSID) along with their security
protocols, such as WEP, WPA and WPA2.
network will also be displayed.
Select the name of your network and press OK.
If your network is protected by a security password, an onscreen keyboard will
appear allowing you to enter the required password.
Enter the network security password and press OK.
Once this is done the Cyclone MKV 2 will begin its Connection Testing mode.
This mode will attempt to acquire an IP Address and connect you to your
network.
Once the player has finished acquiring an IP Address a Test OK screen will
appear displaying information such as IP Address, Subnet Mask and Gateway,
amongst others.
You have now successfully connected to your local wireless network.

Viewing Multimedia:

The Cyclone MKV 2 is a full featured multimedia player, providing a wide
range of functionality.
By using its "Browse" menu you can easily play movies, music and image files
that are stored on an external storage device.

Movie Playback:

Playing movies using the Cyclone MKV 2 is very simple.
When you have attached an external storage device that contains movie files,
i.e. external hard drive, USB flash drive etc, the MKV 2 may require a few
moments to detect all the files.
Cyclone MKV 2 Multimedia Enclosure
Wi-Fi Protected Setup. This mode allows the
Cyclone MKV 2 to join a wireless network.
This mode uses a central connection point,
usually a router.
Note: This mode requires a WPS enabled
dongle and router.
The signal strength of each
Page 24.
Version 1.2