Sumvision Cyclone MKV2 Firmware Flash Manual

Sumvision Cyclone MKV2 Enclosure Firmware flash guide
This guide is to show you how to force the Sumvision Cyclone MKV2 Enclosure into
performing a firmware flash from a 'bricked' state. The firmware provided with this document is
the same as the original firmware that is shipping with the MKV2 Enclosure - it is NOT an
update, if your device is working ok then please don't update the firmware.
Disclaimer: This firmware flash method involves taking apart the MKV2 Enclosure and
removing the PCB, if you are competent in doing this you will recover your device to a working
state however doing so may void your warranty if you damage the product in any way so
proceed at your own risk.
1. Copy the firmware(install.img) into the root directory of your USB storage device, and
connect it with the player.
2. Short circuit the points as shown in the above and below pictures before you switch on the
Player.