File Copy; Copy / Move - Sumvision Cyclone MKV 2 User Manual

Cyclone MKV 2 Multimedia Enclosure

File Copy:

The Cyclone MKV 2 comes equipped with file copy, move and delete
functions.

Copy / Move:

The file copy function allows you to copy files between USB devices, HDD
and storage devices connected via wired LAN.
From the main menu select Copy File to enter the file management menu.
This will bring up the Copy interface. You will notice that the interface is split
into two columns. The column on the left side of the screen indicates where
the file is located and is labelled Source. The column on the right side of the
screen indicates the destination where the file will be copied to. This column
is labelled Destination.
To copy / move a file from one device to another, the source of the file must
be select first. This can be done by using the NAVIGATION buttons.
In the source column navigate to the file you wish to copy. To select the file
you wish to copy / move, use the NAVIGATION buttons on the remote control
to navigate to the file. Depending on how the directory has been structured,
Page 31.
Version 1.2