Usb Host Interface; Direct Pc Connection Via Usb - Sumvision Cyclone MKV 2 User Manual

* Please note optical cable is not supplied with this product.

USB Host Interface:

The Cyclone MKV 2 comes with two USB Host ports, allowing for quick and
easy external media storage expansion.
external hard disk drives, flash drives, digital cameras, card readers and other
data storage devices.
To connect your external hard disk drive to your Cyclone MKV 2, please turn
off the media player. Connect the USB cable to the USB port on the external
hard disk drive and the media player.
Please note that some external hard disk drives may require more power than
a standalone USB port can provide. In such cases please use the AC adapter
included with your external hard disk drive.

Direct PC Connection via USB:

The Cyclone MKV 2 is also capable of acting as an external USB storage
device.
Plug the power adapter into the Cyclone MKV 2, as your PC may not detect
the player if there is insufficient power.
Using a USB cable*, connect one end to the media player and the other into
any available USB port.
Once connected, it may take a moment for your PC to recognise the player as
an external storage device.
* Please note USB cable is not supplied with this product.
Please note a hard disk drive must be installed in the enclosure.
Important Notice: Do not disconnect the power whilst connected to the PC
and transferring data, as this may cause serious damage.
Cyclone MKV 2 Multimedia Enclosure
It is compatible with standard
Page 20.
Version 1.2