Wireless - Sumvision Cyclone MKV 2 User Manual

Wireless:

The Cyclone MKV 2 is also able to connect to a wireless network via a
wireless USB Dongle.
Please note that this functionality requires a wireless USB dongle to be
connected to the Cyclone MKV 2.
To connect a wireless dongle to the Cyclone MKV 2, insert it into an available
USB port. When the player is switched on the Cyclone MKV 2 will
automatically detect the wireless dongle.
If the wireless dongle has been detected, the words "WiFi Plug In" will display
on the top left hand side of the screen.
When the wireless dongle has been detected by the Cyclone MKV 2 player,
select the "setup" icon on the main menu.
Navigate to the "Network" setup screen and select "Wireless Setup"
On the next screen you will be required to setup a configuration profile.
The Cyclone MKV 2 provides multiple configuration profiles, allowing the
player to connect to multiple wireless networks.
For this example we will use the profile labelled "connection 1".
After you have selected "connection 1," three options will be given to you,
"Infrastructure (AP)," "Peer to Peer (Ad-Hoc)" and "WPS (AP)."
Infrastructure (AP)
Peer to Peer (Ad-Hoc)
Cyclone MKV 2 Multimedia Enclosure
This mode allows the Cyclone MKV 2 to join a
wireless network. This mode uses a central
connection point, usually a router.
This mode allows the Cyclone MKV 2 to
directly connect to a wireless device without
the need of a router.
Page 23.
Version 1.2