Setup Utility; Table 8-3. Setup Utilityf - HP Compaq D315 Technical Reference Manual

8.4

SETUP UTILITY

The Setup utility (stored in ROM) allows the user to configure system functions involving
security, power management, and system resources. The Setup utility is ROM-based and invoked
when the F10 key is pressed during the time the F10 prompt is displayed in the lower right-hand
corner of the screen during the POST routine. Highlights of the Setup utility are described in the
following table.
NOTE: Support for Computer Setup options may vary depending on your specific
hardware configuration.
Table 8-3. Setup Utility Functions
Heading
File
Storage
Table 8-3.
Setup Utility Functions
Option
System Information
About
Set Time and Date
Save to Diskette
Restore from Diskette
Set Defaults and Exit
Ignore Changes and Exit
Save Changes and Exit
Device Configuration
Second Edition – April 2003
Description
Lists:
Product name
Processor type/speed/stepping
Cache size (L1/L2)
FSB frequency
Integrated MAC address
System ROM (includes family name and version)
Chassis serial number
Asset tracking number
Integrated MAC for embedded, enabled NIC (if
applicable)
Displays copyright notice.
Allows you to set system time and date.
Saves system configuration, including CMOS, to a
blank, formatted 1.44-MB diskette.
Restores system configuration, including CMOS,
from a diskette.
Restores factory default settings, which includes
clearing any established passwords.
Exits Computer Setup without applying or saving
any changes.
Saves changes to system configuration and exits
Computer Setup.
Lists all installed storage devices. The following
options appear when a device is selected:
Diskette Type (For legacy diskette drives only)
Identifies the highest capacity media type accepted
by the diskette drive. Options are 3.5" 1.44 MB and
5.25" 1.2 MB.
Drive Emulation Allows you to select a drive
emulation type for a storage device. (For example,
a Zip drive can be made bootable by selecting hard
disk or diskette emulation.) Selecting "None"
prevents the device from being accessed by BIOS
or though DOS. Operating systems that use their
own mass storage drivers will not be affected by
choosing "None."
Transfer Mode (IDE devices only)
Specifies the active data transfer mode. Options
(subject to device capabilities) are PIO 0, Max PIO,
Enhanced DMA, Ultra DMA 0, and Max UDMA.
Compaq D315 and hp d325 Personal Computers
Featuring the AMD Athlon XP Processor
Technical Reference Guide
Continued
8-5