Viewing Or Editing A Wireless Network; Deleting A Wireless Network; Monitoring Signal Strength And Status - HP rx3000 Series User Manual

Viewing or Editing a Wireless Network

To view or edit an existing or available wireless network:
1. Be sure Wi-Fi is on.
2. From the iPAQ Wireless screen, tap Settings > Wireless tab.
3. In the Wireless networks box, tap the desired network name.
4. Edit the existing settings as necessary, and then tap OK to
save the changes.

Deleting a Wireless Network

To delete an existing or available wireless network:
1. Be sure Wi-Fi is on.
2. From the iPAQ Wireless screen, tap Settings > Wireless tab.
3. In the Wireless networks box, tap and hold the network you
want to delete.
4. Tap Remove Settings.

Monitoring Signal Strength and Status

To view the signal strength between your HP iPAQ and an access
point Wi-Fi connection:
1. Tap the Connections icon (
2. When the Connectivity box displays, you will be able to
view the type of network the HP iPAQ is connected to (for
example, Work or Internet) and an icon displaying the signal
strength.
Note:
connection is not present.
User's Guide
The Signal Strength icon will not be displayed if a
or ) >in the Navigation bar.
Using Wi-Fi
8–8