Charging With The Desktop Cradle And Ac Adapter - HP rx3000 Series User Manual

Charging with the Desktop Cradle and
AC Adapter
Use the Desktop Cradle to:
■
Charge the HP iPAQ.
■
Synchronize the HP iPAQ with your computer.
(For information on synchronizing, refer to
section "Synchronizing with Your
To charge the HP iPAQ using the desktop cradle:
1. Plug the AC adapter into an electrical outlet 1 and connect
the other end of the AC adapter to the AC connector on the
desktop cradle 2.
2. Slide the bottom of your HP iPAQ into the cradle 3 and push
firmly to seat it.
Ä
CAUTION: To avoid damaging your HP iPAQ or the cradle, check to
be sure the HP iPAQ and cradle connectors are properly aligned before
pushing the HP iPAQ into the cradle.
User's Guide
Managing the Battery
Chapter 3, in
Computer.")
10–7