Find An Ip Address; Delete A Wireless Network; Configure The 802.1X Authentication Settings; Bluetooth - HP FB040AA Product Manual

Find an IP address

To find an IP address:
1.
Tap the
2.
Tap the
3. Connect to a network automatically or manually by tapping Start > Settings > Connections >
HP iPAQ Wireless > WLAN > View WLAN Networks > Network Adapters.
4. Select a WLAN network. The WLAN IP address is displayed at the bottom of the WLAN screen.

Delete a wireless network

You can delete networks you manually entered. However, if a network was automatically detected, you
cannot delete it.
To delete an existing or available wireless network:
1.
Tap the
2.
Tap the
3. Tap WLAN > View WLAN Networks > Wireless.
4. In the Configure Wireless Networks box, tap and hold the network you want to delete.
5. Tap Remove Settings.

Configure the 802.1x authentication settings

Contact your network administrator to determine if authentication information is needed before
performing these steps.
To configure the 802.1x authentication settings:
1. To manually enter information, tap Start > Settings > Connections > HP iPAQ Wireless >
WLAN > View WLAN Networks.
2. In Configure Wireless Networks list, select the network you want to configure.
3. Tap Next until you reach the second Configure Network Authentication screen.
4. For increased security, select the Use IEEE 802.1x network access control check box, select
the required EAP type, and then tap Finish.

Bluetooth

Bluetooth wireless technology is a short-range data communication technology. It uses frequency
hopping in timeslots and has the ability to simultaneously handle both data and voice transmissions.
Bluetooth signals avoid interference from other signals by hopping to a new frequency after transmitting
or receiving a data packet. Therefore, this technology is robust, cost-effective, and replaces cables
connecting devices, assuring high levels of security.
20 Chapter 6 Connections
(iPAQ Wireless) icon.
(WLAN) icon to turn on WLAN, and then tap the WLAN tab.
(iPAQ Wireless) icon.
(WLAN) icon to turn on WLAN, and then tap the WLAN tab.