Ipaq Mobile Media - HP rx3000 Series User Manual

Problem
I cannot connect
to an available
network that
shows in the list of
networks without a
name.
I cannot connect
reliably to an
available network
or connections
are frequently
dropped.

iPAQ Mobile Media

For more information on iPAQ Mobile Media, refer to Chapter 6,
"Getting to Know iPAQ Mobile Media."
User's Guide
Solution (Continued)
It is likely that the network is a "hidden" or non-SSID broadcast
network. You must know the network name (SSID) to be able to
connect.
1. Tap Start > Settings > Connections tab > Connections
> Advanced tab > Network Card.
2. Select Add New Settings.
3. Enter the network name (SSID).
4. Select the appropriate values in the Connects to: box.
5. If WEP settings are required, tap the Authentication tab
and enter them.
• Be sure there is ample signal strength available in the
area.
• If you are using one of the WLAN Power Save modes, try
changing modes or turning off Power Save. Refer to
Chapter 10, "Managing the Battery"
• If you are using Extended Power Save mode, turn off
Bluetooth.
Troubleshooting
for more information.
12–10