Starting Vpn Server Connections; Setting Up Proxy Server Settings - HP rx3000 Series User Manual

Starting VPN Server Connections

To start a connection through a VPN server:
1. Be sure Wi-Fi is on.
2. Select the VPN network by tapping the Connections icon
(
Your HP iPAQ will automatically begin connecting to the Virtual
Private Network.

Setting Up Proxy Server Settings

If you are connected to your ISP or private network during
synchronization, your HP iPAQ should download proper proxy
settings from your computer. If these settings are not on your
computer or need to be changed, you will need to set them up
manually. To set up proxy server settings:
1. Contact your ISP or network administrator for the proxy
server name, server type, port, type of Socks protocol used,
and your user name and password.
2. Be sure Wi-Fi is on.
3. Tap the Connections icon (
and then Settings > Task tab.
4. Under My Work Network, tap Edit my proxy server >
Proxy Settings tab.
5. Tap the This network connects to the Internet and This
network uses a proxy server to connect to the Internet
checkboxes.
6. In the Proxy server box, enter the proxy server name.
7. If you need to change port number or proxy server type
settings, tap the Advanced button and change the desired
settings.
8. Tap OK.
User's Guide
or ) located in the Navigation bar.
or ) in the Navigation bar,
Using Wi-Fi
8–14