Creating A Custom Backup - HP rx3000 Series User Manual

clicking on this icon (
Start > All Programs > Hewlett-Packard > Mobile Media for
PC > NevoBackup.
Note:
NevoBackup to operate.
NevoBackup has two basic tasks: Create a custom backup of
my current Nevo configuration and Restore my Nevo
configuration to an earlier backup." Your previous two
configurations are automatically saved.

Creating a Custom Backup

1. Place your HP iPAQ in its desktop cradle or connect it to the
sync cable.
2. Right-click on the NevoBackup icon (
and select Open.
3. Select Next at the Welcome screen.
4. On the Backup Tasks screen, select Create a custom
backup of my current Nevo configuration then select Next.
5. Choose a descriptive name for this configuration and select
Next to save it.
6. You will be returned to Backup Tasks screen where you can
perform another task, or select Cancel to exit NevoBackup.
User's Guide
Microsoft Active Sync must be installed in order for
Getting to Know iPAQ Mobile Media
) in your system tray, or by selecting
) in the system tray
6–34