Installation Instructions - GE Profile DPVH890 Owner's Manual & Installation Instructions

Ge profile dryers owner's manual & installation instructions
Table of Contents

Advertisement

Available languages

Available languages

UNPACKING YOUR DRYER
Tilt the dryer sideways and remove the foam
shipping pads by pulling at the sides and breaking
them away from the dryer legs. Be sure to remove
all of the foam pieces around the legs.
Remove the bag containing the literature and serial
cable.
LOCATION OF YOUR DRYER
MINIMUM CLEARANCE OTHER THAN
ALCOVE OR CLOSET INSTALLATION
Minimum clearance to combustible surfaces and
for air openings are:
• 0 inch clearance both sides
• 1 inch front
• 3 inches rear
Consideration must be given to provide adequate
clearance for proper operation and service.

Installation Instructions

14
DRYER DIMENSIONS
Front View
(68.6 cm)
(68.6 cm)
53"
51"
(134.6 cm)
(129.5 cm)
Side View
33.5"
32.34"
(85.1 cm)
(847 cm)
39.5"
39.1"
(100.3 cm)
(993 cm)
27"
27"
39.5"
39.1"
(100.3 cm)
(993 cm)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Profile upvh890

Table of Contents