Zones; Fire Protection; Burglary Protection - First Alert FA1600C User Manual

Zones

Fire Protection

Burglary Protection

Technical Manuals Online! - http://www.tech-man.com
Your system's sensing devices have been assigned to various "zones."
For example, the sensing device on your Entry/Exit door may have
been assigned to zone 001, sensing devices on windows in the master
bedroom to zone 002, and so on. These numbers will appear on the
display, along with an alpha descriptor for that zone (if programmed),
when an alarm or trouble condition occurs.
The fire protection portion of your security system (if used) is always
on and will sound an alarm if a fire condition is detected. Refer to the
FIRE ALARM SYSTEM section for important information concerning
fire protection, smoke detectors and planning emergency exit routes
from your house.
The burglary protection portion of your system must be turned on or
"armed" before it will sense burglary alarm conditions. Your system
provides four modes of burglary protection: STAY, AWAY, INSTANT
and MAXIMUM, and even allows you to BYPASS selected zones of
protection while leaving the rest of the system armed. The system
also provides a CHIME mode, for alerting users to the opening and
closing of doors and windows while the system is disarmed. Refer to
the other sections of this manual for procedures for using these
features.
System Overview (cont'd)
– 5 –