To Exit User Edit Mode; To Add A User - First Alert FA1600C User Manual

Security Codes & Authority Levels (cont'd)

To Exit User Edit Mode

To Add a User

– 18 –
Technical Manuals Online! - http://www.tech-man.com
You can exit any of the user edit modes described on the following
pages at any time by doing the following:
1. Press either or # , or don't press any key for 10 seconds.
2. System returns to normal mode.
IMPORTANT: Temporary users should not be shown how to use any
system function they do not need to know (e.g. bypassing protection
zones).
1. Enter Master or Manager code and press the 8 key.
2. Enter the new user's 3-digit User Number (002-150).
3. Enter 4-digit security code for that user. The following prompts
will appear.
ADD NEW USER?
0 = NO , 1 = YES
USER NUMBER = 003
ENTER AUTH. LEVEL
ACCESS GROUP?
ENTER 0-8
Enter 1 to add a new user code. Entering 0
will change the existing user's code to the
code entered in step 3. See Changing A User's
Code section.
Enter the authority level, 1-6, for this user
within this partition.
1=master 2=manager
4=operator B 5=operator C 6=duress code
If access schedules have been programmed,
this prompt appears. Enter the user's access
group number (1-8) if this user should have
limited access to the system. Enter 0 if no
access group should be assigned.
CODE
3=operator A